Item type: Item , Access status: Open Access , Add to my list

A sustainable approach to waste treatment: Activated hydrochars for catalytic wet air oxidation of hydrothermal carbonisation effluent

Abstract

Hydrothermal carbonisation (HTC) of refinery-sludge produces a valuable hydrochar and a highly polluted aqueous effluent whose treatment remains a critical engineering challenge. Although the application of hydrochar from lignocellulosic biomass has been extensively investigated, little is known about the activation and catalytic potential of hydrochars derived from mineral-rich refinery residues. This study evaluates activated refinery-sludge hydrochars (HCR) as heterogeneous catalysts for the Catalytic Wet Air Oxidation (CWAO) of the HTC effluent, and it compares their performance with orange peel-derived hydrochars (HCO), a lignocellulosic precursor material with contrasting composition. Both hydrochars were activated by chemical (KOH, CuCl) and physical (steam, CO₂) routes. KOH activation generated highly porous catalysts, reaching 924 m²/g (HCR-KOH) and 1837 m²/g (HCO-KOH), whereas CuCl22 activation introduced redox-active Cu species. Comprehensive characterisation (CHNS, ICPOES, XRD, XPS, N₂ isotherms, SEM-EDS) revealed strong precursor-dependent differences in mineral content, oxygen functionalities, and porosity development. CWAO experiments demonstrated that HCR-derived catalysts exhibited the highest oxidation performance. Among the activated materials, HCR–CuCl2 displayed the highest TOC removal (>90%). However, this activity was largely driven by copper leaching into the liquid phase, leading to predominantly homogeneous oxidation. In contrast, the KOH-activated refinery hydrochar (HCR–KOH) provided high catalytic activity without detectable metal leaching, confirming its role as a truly stable heterogeneous catalyst. HCO-based catalysts also improved TOC and COD removal but exhibited lower mineralisation, driven primarily by microporosity rather than by redox sites. The higher performance of HCR-KOH is due to the presence of redox-active minerals and its moderate mesoporosity, which ensures accessibility. This produces a synergistic effect in the HCR-KOH, whereas the HCO-KOH, despite its extremely high surface area, lacks such mineral contributions, and its microporosity alone does not improve the performance of the CWAO. GC-MS analysis confirmed a reliable shift toward low-molecular-weight oxygenated compounds, consistent with an improved average oxidation state. These results demonstrate the technical feasibility of KOH-activated refinery-sludge hydrochars as effective CWAO catalysts for HTC effluent treatment, supporting a circular approach to refinery wastewater management through activation process that avoid metal leaching.
Loading...

Quotes

Journal Title

Journal ISSN

Volume Title

Publisher

Elsevier

URL external

External URL

Description

Citation

L.N. Mora, M.I. Pariente, Y. Segura, J.L. Diaz de Tuesta, R. Molina, F. Martínez, A sustainable approach to waste treatment: Activated hydrochars for catalytic wet air oxidation of hydrothermal carbonisation effluent, Journal of Environmental Chemical Engineering, Volume 14, Issue 3, 2026, 122236, ISSN 2213-3437, https://doi.org/10.1016/j.jece.2026.122236.

Endorsement

Review

Supplemented By

Referenced By

Statistics

Views
4
Downloads
13

Bibliographic managers

Document viewer

Select a file to preview:
Reload