Examinando por Autor "Shazhad, Hasan"
Mostrando 1 - 1 de 1
- Resultados por página
- Opciones de ordenación
Ítem Examining the mass transport resistance of porous transport layers at the rib/channel scale in polymer electrolyte membrane water electrolyzers: Modeling and design(Elsevier, 2025-07) García-Salaberri , Pablo A.; Lang, Jack Todd; Chang , Hung-Ming; Firas, Nausir; Shazhad, Hasan; Zenyuk, Iryna V.The porous transport layer (PTL) plays a relevant role in the efficiency of polymer electrolyte membrane water electrolyzers (PEMWE). Extraction of good design guidelines for this porous component is necessary for efficient water/oxygen transport. In this regard, numerical modeling provides a versatile tool to examine large parameter set and determine optimal PTL conditions to be verified experimentally. Here, a hybrid model is presented to analyze two-phase transport of oxygen and water in the anode PTL of a PEMWE. Oxygen capillary transport is modeled with a multi-cluster invasion-percolation algorithm, while water convective transport is modeled with a continuum formulation that incorporates the blockage of gas saturation. The model is validated against in-operando X-ray computed tomography data of the oxygen saturation distribution at the rib/channel scale. Subsequently, a comprehensive parametric analysis is presented, considering the following variables: (𝑖) PTL slenderness ratio, (𝑖𝑖) flow-field open area fraction, (𝑖𝑖𝑖) PTL isotropy, (𝑖𝑣) PTL average pore radius, and (𝑣) PTL pore-size heterogeneity. Among other conclusions, the results show that the water transport resistance under the rib can lead to non-negligible mass transport losses at high current density. Water transport from the channel to the catalyst layer can be promoted by: (𝑖) the use of PTLs with a slenderness ratio, defined as the PTL thickness to rib half-width ratio, around 0.5, (𝑖𝑖) the increase of the flow-field open area fraction, (𝑖𝑖𝑖) the design of highly anisotropic PTLs with a relatively large pore radius between 𝑟𝑝 ∼ 10 − 40 μm, and (𝑖𝑣) increasing the homogeneity of the PTL microstructure