Guidance Navigation and Control Algorithms for High Dynamics Vehicles
Fecha
2017
Autores
Título de la revista
ISSN de la revista
Título del volumen
Editor
Universidad Rey Juan Carlos
Resumen
Accuracy and precision are the cornerstone for ballistic projectiles from the earliest days of
this discipline. In the beginnings, impact point precision in artillery devices deteriorated
when range was extended, particularly for ballistic artillery rockets and shells, which are
not propelled except during the launch. Later, inertial navigation and guidance systems
were introduced and precision was unlinked from range increases. In the last thirty
years, hybridization between inertial systems and GNSS devices has improved precision
enormously.
Unfortunately, during the last stages of
ight, inertial and GNSS methods (hybridized
or not) feature big errors in attitude and position determination. Low cost devices, which
are precise on terminal guidance and do not feature accumulative error, such as quadrant
photo-detector, seem to be appropriate to be included in the guidance systems. Hybrid
algorithms, which combine GNSSs, IMUs and photo-detectors, are required to implement
these novel techniques.
The acceleration autopilot with a rate loop is the most commonly implemented autopilot,
which has been extensively applied to high-performance missiles. Nevertheless,
for high speed spinning rockets, the design of the guidance and control modules is a challenging
task because the rapid spinning of the body creates a heavy coupling between the
normal and lateral rocket dynamics.
Hybridized measurements are implemented in modi ed proportional navigation law
and a rotatory force control method. A realistic non-linear
ight dynamics model, particularized for a high spinning ballistic rocket, has been developed to perform simulations
to prove the accuracy of the presented algorithms.
The research process developed to obtain the nal results implied the following steps:
1. The development of a
ight model in order to simulate the dynamics of a highly
spinning rocket which features a decoupled fuse.
2. The development of a novel 3D guidance law, based on a modular rotatory force, for
gyroscopically stabilized artillery rockets (i.e., spin rates in the hundreds of rotations
per second during the launch), which is derived from proportional navigation.
3. A model for a quadrant photo-detector based on a real-time area intersection algorithm
was developed and the subsequent development of a novel algorithm which
improves the precision of spot center determination for a Semi-active Laser quadrant
detector in the terminal guidance of artillery rockets.
4. The integration of this photo-detector spot center determination algorithm and the
hybridization with GNSS/IMU in order to improve the precision of the line of sight.
5. The development of an algorithm, based on an estimation method in order to obtain
the gravity and velocity vectors in a di erent pair of triads, which aims at avoiding
gyroscopes for attitude determination.
6. The integration of these attitude determination methods together with the aid of
ltering techniques, into the previously photo-detector, GNSS, IMU, and control
rotatory force, developed algorithms.
Finally, nonlinear simulations based on ballistic rocket launches were performed to
demonstrate the applicability of the proposed solution for
ight navigation, guidance and
control, for ballistic rocket terminal guidance.
Descripción
Tesis Doctoral leída en la Universidad Rey Juan Carlos de Madrid en 2017. Director de la Tesis: Luis Cadarso Morga
Palabras clave
Citación
Colecciones
Excepto si se señala otra cosa, la licencia del ítem se describe como Attribution-NonCommercial-NoDerivatives 4.0 Internacional