4D-Printed Resins and Nanocomposites Thermally Stimulated by Conventional Heating and IR-Radiation

dc.contributor.authorCortés, A.
dc.contributor.authorAguilar, Jose L.
dc.contributor.authorCosola, A.
dc.contributor.authorFernández Sanchez-Romate, Xoan Xosé
dc.contributor.authorJiménez-Suárez, A.
dc.contributor.authorSangermano, M.
dc.contributor.authorCampo, M.
dc.contributor.authorProlongo, Silvia G.
dc.date.accessioned2022-04-21T08:10:53Z
dc.date.available2022-04-21T08:10:53Z
dc.date.issued2021
dc.description.abstractThe shape memory (SM) capabilities of nanocomposites based on two photocurable acrylated/methacrylated resins, doped with carbon nanotubes (CNTs), and manufactured by digital light processing 3D printing were investigated. The mechanical properties and glass transition temperature (Tg) can be tailored in a broad range by varying the weight ratio of the two resins (Tg ranging from 15 to 190 °C; Young’s modulus from 1.5 to 2500 MPa). Shape fixity (SF) and recovery (SR) ratios are strongly influenced by the temperature being significantly higher at temperatures close to the Tg. The results confirm that the SF strongly depends on the stiffness of chain segments between cross-linking points, whereas the SR mainly depends on the cross-link density of the network. CNT addition barely affects the SF and SR in the conventional oven, whereas the recovery speed using IR heating is significantly increased for the doped nanocomposites due to their higher IR absorbance.es
dc.identifier.citation4D-Printed Resins and Nanocomposites Thermally Stimulated by Conventional Heating and IR Radiation A. Cortés, Jose L. Aguilar, A. Cosola, Xoan Xosé Fernández Sanchez-Romate, A. Jiménez-Suárez, M. Sangermano, M. Campo, and Silvia G. Prolongo ACS Applied Polymer Materials 2021 3 (10), 5207-5215 DOI: 10.1021/acsapm.1c00970es
dc.identifier.doi10.1021/acsapm.1c00970es
dc.identifier.issn2637-6105
dc.identifier.urihttp://hdl.handle.net/10115/19090
dc.language.isoenges
dc.publisherACSes
dc.rightsAtribución 4.0 Internacional*
dc.rights.accessRightsinfo:eu-repo/semantics/openAccesses
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/*
dc.subjectshape memoryes
dc.subject4D printinges
dc.subjectadditive manufacturinges
dc.subjectcarbon nanotubeses
dc.subjectnanocompositeses
dc.title4D-Printed Resins and Nanocomposites Thermally Stimulated by Conventional Heating and IR-Radiationes
dc.typeinfo:eu-repo/semantics/articlees

Archivos

Bloque original

Mostrando 1 - 1 de 1
Cargando...
Miniatura
Nombre:
acsapm.1c00970.pdf
Tamaño:
3.68 MB
Formato:
Adobe Portable Document Format
Descripción: